• Bitte schaltet eure Ad Blocker aus. SLinfo kann nur betrieben werden, wenn es durch Werbung Einnahmen erzielt. Vielen Dank!!
  • Wir freuen uns, wenn du dich in unserem Forum anmeldest. Bitte beachte, dass die Freigabe per Hand durchgeführt wird (Schutz vor Spammer). Damit kann die Freigabe bis zu 24 Stunden dauern.
  • Wir verwenden Cookies, um Inhalte und Anzeigen zu personalisieren, Funktionen für soziale Medien anbieten zu können und die Zugriffe auf unsere Website zu analysieren. Sie geben Einwilligung zu unseren Cookies, wenn Sie unsere Webseite weiterhin nutzen.

Xampp verschieben

J

Janina Dufaux

Guest
Hallo

ich will die Xampp Datenbank verschieben. Muss ich da was beachten? Ich hab gemerkt dass das nicht so einfach geht. Wie mach ich das ohne den Inhalt zu verlieren?
 
xampp oder mysql datenbank ? ;)

ich denke du meinst mysql, zuerst mal musst du nen neuen pfad festlegen wo mysql die daten speichern soll, aber da kann ich dir leider nicht helfen, da ich mit der konfiguration von mysql keine ahnung habe *sich schäm*
 
Hi Jani,

dazu musst du die MySQL Ini Datei entsprechend des pfades ändern wo du die Daten hinschubbst. Ist eigentlich ganz simpel zu bewerkstelligen ;)
 
Mit der Datei kann ich ja gar nichts anfangen, öffnen, bearbeiten ... wie öffnet man die? :shock:
 
gugg mal in dein windoof verzeichnis nach der my.ini datei

ädit: nee ist doch die datei von simba ... die müsstet du mit dem mysqladmin tool öffnen können ... hab mein rechner mit der db nicht an, sonst hätte ich dir geholfen, nur so bin ich mir da grad nicht 100% sicher wie das war .. aber eigentlich war es sehr simpel
 
Auweia, jetzt hab ich das geändert. Jetzt startet Xampp nicht mehr richtig. Da steht im Info Fenster WARNING: Directory Mismatch. Hab Windows neu gestartet und die Datenbanken laufen nicht mehr. Sonst steht oben immer Running, jetzt nicht mehr. Klick ich auf Start, kommt im Infofenster: ERROR Apache (mysql) service not startet.
 
start -> ausführen -> notepad.exe
datei -> öffnen -> datei eingeben

bearbeiten

speicher

:)
 
Janina Dufaux schrieb:
Auweia, jetzt hab ich das geändert. Jetzt startet Xampp nicht mehr richtig. Da steht im Info Fenster WARNING: Directory Mismatch. Hab Windows neu gestartet und die Datenbanken laufen nicht mehr. Sonst steht oben immer Running, jetzt nicht mehr. Klick ich auf Start, kommt im Infofenster: ERROR Apache (mysql) service not startet.

poste ma die datei und sag mir so der neue pfad sein soll, ich pass es dir dann an.
 
**************************
# Example MySQL config file for small systems.
#
# This is for a system with little memory (<= 64M) where MySQL is only used
# from time to time and it's important that the mysqld daemon
# doesn't use much resources.
#
# You can copy this file to
# /xampp/mysql/bin/my.cnf to set global options,
# mysql-data-dir/my.cnf to set server-specific options (in this
# installation this directory is /xampp/mysql/data) or
# ~/.my.cnf to set user-specific options.
#
# In this file, you can use all long options that a program supports.
# If you want to know which options a program supports, run the program
# with the "--help" option.

# The following options will be passed to all MySQL clients
[client]
# password = your_password
port = 3306
socket = "/xampp/mysql/mysql.sock"

# Here follows entries for some specific programs

# The MySQL server
[mysqld]
port= 3306
socket= "/xampp/mysql/mysql.sock"
basedir=D:/OpenSim/xampp/mysql
tmpdir="/xampp/tmp"
datadir=D:/OpenSim/xampp/mysql/data
skip-locking
key_buffer = 16M
max_allowed_packet = 1M
table_cache = 64
sort_buffer_size = 512K
net_buffer_length = 8K
read_buffer_size = 256K
read_rnd_buffer_size = 512K
myisam_sort_buffer_size = 8M



# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
#
# commented in by lampp security
#skip-networking

# Replication Master Server (default)
# binary logging is required for replication
# log-bin deactivated by default since XAMPP 1.4.11
#log-bin=mysql-bin

# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id = 1

# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
# the syntax is:
#
# CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
# MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
# where you replace <host>, <user>, <password> by quoted strings and
# <port> by the master's port number (3306 by default).
#
# Example:
#
# CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
# MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
# start replication for the first time (even unsuccessfully, for example
# if you mistyped the password in master-password and the slave fails to
# connect), the slave will create a master.info file, and any later
# change in this file to the variables' values below will be ignored and
# overridden by the content of the master.info file, unless you shutdown
# the slave server, delete master.info and restart the slaver server.
# For that reason, you may want to leave the lines below untouched
# (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id = 2
#
# The replication master for this slave - required
#master-host = <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user = <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password = <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port = <port>
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin


# Point the following paths to different dedicated disks
#tmpdir = "/xampp/tmp"
#log-update = /path-to-dedicated-directory/hostname

# Uncomment the following if you are using BDB tables
#bdb_cache_size = 4M
#bdb_max_lock = 10000

# Comment the following if you are using InnoDB tables
#skip-innodb
innodb_data_home_dir = "/xampp/mysql/"
innodb_data_file_path = ibdata1:10M:autoextend
innodb_log_group_home_dir = "/xampp/mysql/"
innodb_log_arch_dir = "/xampp/mysql/"
## You can set .._buffer_pool_size up to 50 - 80 %
## of RAM but beware of setting memory usage too high
innodb_buffer_pool_size = 16M
innodb_additional_mem_pool_size = 2M
## Set .._log_file_size to 25 % of buffer pool size
innodb_log_file_size = 5M
innodb_log_buffer_size = 8M
innodb_flush_log_at_trx_commit = 1
innodb_lock_wait_timeout = 50

[mysqldump]
quick
max_allowed_packet = 16M

[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates

[isamchk]
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M

[myisamchk]
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M

[mysqlhotcopy]
interactive-timeout
[WinMySQLAdmin]
Server=D:/OpenSim/xampp/mysql/bin/mysqld-nt.exe
*******************

So sieht das aus. Hab vorne nur die Das Laufwerk geändert. Erst wars auf C und jetzt ist es auf D
 
basedir muss c bleiben, das gibt den pfad zu allen daten wie den librarys etc an, kein wunder dass es nicht geht ;)

und dein zielordner muss existent sein, existiert er nicht musst du ihn anlegen.
 
dann musst du auch im windoofverzeichnis, die my.ini datei anpassen, die auf den MySQL Server verweisst, dort ist er sicherlich noch unter C: eingetragen ...
 
Also Xampp existiert ja auch noch im alten Verzeichnis. Geht jetzt trotzdem nicht mehr. Muss ich jetzt YXamp neu installieren? Weil, sieht ja nach kaputt aus.
 
Hab ich ja gemacht Net, Xampp lässt sich gar nicht mehr starten. Datenbank ist weg.
 
ich empfehle dir nicht die installations version runter zu laden, sondern xampp lite, das kopiert nix in die windows system ordner

somit ist das verschieben usw kein problem.
 
Janina Dufaux schrieb:
Hab ich ja gemacht Net, Xampp lässt sich gar nicht mehr starten. Datenbank ist weg.

datenbank ist nicht weg, die datei befindet sich im data ordner von mysql, in einem ordner mit dem namen der datenbank
den ordner kopieren und sichern, kannste später durch einfügen in den data ordner wieder herstellen
 
JUHUUUUU, alles wieder so wie es sein soll, mit neuem Laufwerk der Datenbank. Danke danke danke ihr beiden. *dolle knuddel* :lol:
 

Users who are viewing this thread

Zurück
Oben Unten